 |
 |
|
|
Z0C99 1/1.2kW Floodlight Quad In-line version |
||
 |
 |
|
|
Z0C96 1/1.2kW Floodlight Single cell version |
Z0C98 1/1.2kW Floodlight 4 Square version |
Z0C92 1/1.2kW Floodlight 2 In-line version |
|
|
|
|
|
Z0C99 1/1.2kW Floodlight Quad In-line version |
||
|
|
|
|
|
Z0C96 1/1.2kW Floodlight Single cell version |
Z0C98 1/1.2kW Floodlight 4 Square version |
Z0C92 1/1.2kW Floodlight 2 In-line version |
The Starlette range of asymmetric beam floodlights have been designed to light vertical surfaces from distances ranging from four feet to ten feet (1.3m to 3.5m) from the cloth or cyclorama evenly. This is achieved by reflector side cheeks ahich ensure good overlap and colour mix from one unit to the next at optimum spacing between units.
A unique feature is the toughened safetly glass which will contain all quartz particles in the rare event of lamp failure. This also contributes to the long colour life as both the front of the safety glass and the back of the colour is ventilated.
As ventilation is achieved by a slot in the bottom of the unit, there are no louvre holes to allow reflected light through the back of the unit - making it ideal for use where masking of the units is impossible.
Lamp change is from the rear and does not involve changing the floodlight's position, removing colour frames, or altering any masking that may have been rigged.
The units can be mounted singularly, 2-in-line, 4-square, or 4-in-line. The 4-square unit can be adjusted by tilting the bottom two units in relation to the top two units to overlay the lkit fields.
|
© Copyright CCT LIGHTING (UK) LIMITED 2005 Specifications & materials subject to change without notice E&OE. Please read the Conditions of Use of this web site. |